3, Application of electric hydraulic oil pump:
1. Electric hydraulic oil pump can be used as a hydraulic pump for various hydraulic instruments.
2. After being equipped with electric hydraulic oil pumps and other hydraulic tools, it can perform various tasks such as lifting, molding, bending, straightening, shearing, assembly, and disassembly. Reduce labor intensity and improve work efficiency.
4, Instructions for using electric hydraulic oil pump:
1. When using, open the air release nut, turn on the switch on the oil collection block, plug in the power supply, and put the quick connector on the quick head of the hydraulic equipment.
2. Press the power switch and wait for the motor to rotate for 1-2 minutes. Turn off the switch and place it in the boosting state. At this time, the output hydraulic oil will perform various tasks, and the output hydraulic oil will increase in pressure on its own with the increase of load until it reaches 63MPA. 3. After the work is completed, turn on the switch to unload. After the hydraulic oil returns, remove the quick connector sleeve, tighten the air release nut, remove the solenoid, and turn off the switch.
