As we all know, hydraulic pumps and hydraulic motors are two of the most common hydraulic components in the hydraulic industry, but because of their design structure and working principle is extremely similar, resulting in many people who do not know much about the hydraulic industry can not tell which is which. And for hydraulic pumps and hydraulic motors, hydraulic industry also circulated a lot of paragraphs. For example, some people say that hydraulic pumps and hydraulic motors are like a pair of lovers; some people say that hydraulic pumps and hydraulic motors like generators and motors, an identity of two positions. So, in the end, what is the specific difference between hydraulic pumps and hydraulic motors?
First of all, let's take a look at the similarities between hydraulic motors and hydraulic pumps.
Ⅰ. From the principle, hydraulic motor and hydraulic pump are reversible, if driven by a motor, the output is hydraulic energy (pressure and flow), which is a hydraulic pump; if the input pressure oil, the output is mechanical energy (torque and speed), it becomes a hydraulic motor.
II. Structurally, the two are similar.
(3) The principle of operation, both are the use of sealing changes in the working volume of oil suction and discharge. For hydraulic pumps, the working volume increases when the oil suction, the working volume decreases when the discharge of high-pressure oil. For hydraulic motors, the working volume increases into the high-pressure oil, the working volume decreases when the discharge of low-pressure oil.
Below, let us look at the existence of hydraulic motors and hydraulic pumps what are the differences?
(1) Hydraulic pump is an energy device, while the hydraulic motor is an executive element. Hydraulic pump is the motor's mechanical energy into hydraulic energy conversion device, output flow and pressure, hopefully high volumetric efficiency; hydraulic motor is the liquid pressure energy into mechanical energy device, output torque and speed, hopefully high mechanical efficiency.
(2) hydraulic motor output shaft steering must be able to positive and negative rotation, so its structure is symmetrical; and some hydraulic pumps (such as gear pumps, vane pumps, etc.) steering has a clear regulation, can only be unidirectional rotation, can not change the direction of rotation at will.
(3) hydraulic motor in addition to the inlet and outlet, there is a separate leakage of oil; hydraulic pumps are generally only inlet and outlet (except axial piston pumps), the leakage of oil with the inlet.
(4) The volumetric efficiency of the hydraulic motor is lower than the hydraulic pump.
(5) Usually the working speed of the hydraulic pump are higher, while the hydraulic motor output speed is lower. In addition, gear pumps have large suction ports and small discharge ports, while gear hydraulic motors have the same size suction and discharge ports.


