The daily inspection of the hydraulic motor mainly includes the inspection of the operating conditions, working medium, operating sound and motor temperature rise, etc.; disassembly inspection of the main contents of the parts are damaged, occlusion, cracks and wear and tear. Precautions during the use of hydraulic motors
① hydraulic motor speed can not be too low; ② hydraulic motor oil drain port.
② hydraulic motor drain should be connected back to the tank separately; ③ piston motor first use.
③Piston motor should be used for the first time to fill the housing with working medium; ④In the closed hydraulic motor circuit, the hydraulic motor should be connected to the oil tank separately.
④ in the closed hydraulic motor circuit should be necessary measures to ensure that the flow match is reasonable; ⑤ start the hydraulic motor working medium when the working medium is too low; ⑤ the hydraulic motor speed should not be too low.
⑤ The viscosity of the working medium should not be too high or too low when starting the hydraulic motor.
(6) The brake must be used if the hydraulic motor is to be kept in the braking state for a long time; (7) The end of the shaft of the hydraulic motor should be avoided.
(7) should avoid the hydraulic motor shaft end to withstand radial force; (8) hydraulic motor drain pipe.
⑧ hydraulic motor drain pipe installation orientation should be up; ⑨ internal curve hydraulic motor oil discharge.
⑨ within the curve of the hydraulic motor outlet should have 0.5 ~ 1MPa back pressure; ⑩ start with a load of hydraulic motor
⑩ with the start of the hydraulic motor load should be careful not to overload.
