Axial piston pumps in addition to the valve type flow distribution, other forms can in principle be used as a hydraulic motor, that is, the axial piston pump and axial piston motor is reversible. The working principle of axial piston motor is that the oil distribution disk and swash plate are fixed, and the motor shaft is connected with the cylinder to rotate together. When the pressure oil through the window of the oil distribution plate into the cylinder plunger hole, the plunger in the pressure oil under the action of the extension, close to the swash plate swash plate on the plunger to produce a normal counterforce p, this force can be decomposed into axial force and vertical force Q. Q and the plunger on the hydraulic pressure balance, and Q is to make the plunger on the center of the cylinder body to produce a torque, drive the motor shaft rotating in the counterclockwise direction.
The total instantaneous torque produced by an axial piston motor is pulsating. If the direction of motor pressure oil input is changed, the motor shaft rotates in a clockwise direction. A change in swashplate inclination a, i.e., a change in displacement, affects not only the motor's torque, but also its speed and steering. The greater the swashplate inclination, the greater the torque produced and the lower the speed.
Finally, from the working principle, the same form of hydraulic pumps and hydraulic motors are interchangeable. However, in general, the unimproved hydraulic pump should not be used as a hydraulic motor. This is because taking into account the pressure balance, gap sealing automatic compensation and other factors, hydraulic pump suction and discharge chamber structure is more asymmetric, can only be rotated in one direction. However, as a hydraulic motor, usually requires positive and negative rotation, requiring structural symmetry.


